How do I connect to my Art-Net interface?
Art-Net interfaces all require a different setup process depending on manufacturer and model. In order for Luminair to detect Art-Net interfaces, you'll need to make sure that the IP address assigned to your Art-Net interface falls within ...Read Article
Will Luminair run in the background on iOS?
Yes, Luminair will run in the background on iOS. To enable background operation, open up Luminair's settings and choose the "Always Run in Background" option. There is no time-limit for running in background, however please note that iOS ...Read Article
How do I rearrange the order of Scenes?
In Luminair 3, tap and hold the scene button. Then drag to rearrange.Read Article
What are the feature differences when running Luminair on an iPad vs. ...
As of Luminair 3, the core feature-set is the same on all iOS devices, with the following exceptions: - Apple Watch requires a compatible iPhone running Luminair due to Apple Watch system requirements. Apple Watch currently does not work wi...Read Article
Does Luminair offer a FX engine or movement generators?
Yes, Luminair 3 introduces a brand new FX engine which currently consists of user-configurable Oscillator FX, and Color Loop FX, and Movement FX for moving lights.Read Article
Does Luminair require a live internet connection to work?
Luminair does not require an internet connection for control over lights on the same local network. Luminair only requires a local network connection, meaning the Wi-Fi router that you connect to does not have to be connected to the interne...Read Article
How many Sequences can I run?
It's only possible to run a single Sequence at a time. Luminair doesn't have a set limit for the number of Sequences you can create however, and it's possible to seamlessly change to a new Sequence on the fly by tapping on it in the list wh...Read Article
How do I delete or reorder groups or fixtures in my project?
You can delete and reorder groups and fixtures in the list view. To open the list view, double tap a fader name label. In side panel that appears, tap the list button/icon in upper left corner to display the list view. Once the...Read Article
Can I use multiple iOS devices at the same time to control my lights?
If you'd like to use Luminair on multiple devices to control the same DMX universe at the same time, you'll need to use a DMX merger. Most Art-Net and sACN interfaces support some level of DMX merging, all with different capabilities. The E...Read Article
Using Redpark L2-NET Lighting to Ethernet cable
Luminair v3.1.1 adds initial support for transmitting Art-Net and sACN over “wired” ethernet connections using Redpark’s L2-NET lightning-to-ethernet cable. General instructions and important notes are below. If you need any assistance, pl...Read Article